User guide

Safety 3-13
Locking Out Power
To lock out the Century Series system:
1. Turn OFF (0) the Main Power Circuit Breaker.
2. Unplug the Main Power Cable from the facility source.
3. Lock Main Power cable in a locked box for safety.
High Air Pressure Relief Valve
Pressure of factory air supplied to the dispensing system may fluctuate. The High Air Pressure Relief
Valve opens to relieve system air pressure if it exceeds 690 kPa (100 psi).
If your facility supplies air pressure greater than 690 kPa (100 psi), you must install a regulator on your
facility air supply. For other possible difficulties with air pressure, see the System Troubleshooting
section of this manual.