User guide

4-12 Operation
Table 4-4 Motion Control Buttons (continued)
Button/Indicator Function
DISPENSER
CONVEYOR
Conveyor controls (conveyor belt, conveyor width adjust) and
Dispenser controls (XY-axis, left to right, front to rear)
Press the Dispenser button to activate the Dispensing Head’s XY motion
controls:
• The left and right arrows move the Dispensing Head to the left or right
(X-axis)
• The up and down arrows move the Dispensing Head to the rear and
front of the dispensing area (Y-axis)
• Click and release a single large arrow to move dispense head 0.025
mm (0.001 inches)
• Click and hold a single large arrow to move the Dispensing Head at
25.4 mm/sec (1 in/sec)
• Click and hold a double arrow to move the Dispensing Head at 50 to
75 mm/sec (2 to 3 in/sec)