Manual

Safety 3
2 Safety
Overview
This section describes the precautions to be taken to promote personal safety and safe use of the DJ-2200
Series DispenseJet.
Dispensing system operation involves heat, air pressure, fluid pressure, mechanical and pneumatic devices,
electrical power, and the use of hazardous materials. Refer to the Safety section of the dispensing system
Operations Manual prior to installing and operating the DJ-2200 Series DispenseJet.
Safety is considered a joint responsibility between the original equipment manufacturer (Nordson ASYMTEK)
and the end-user (owner). All safety precautions and practices should be in accordance with local regulations
and facility practice.
WARNING! Unsafe equipment conditions can result in personal injury or property damage.
Failure to adhere to safety warnings and precautions could result in serious bodily
harm to the user.
Safety of Personnel
• Only trained personnel should be permitted to perform installation, operation, maintenance, and
troubleshooting procedures on the DJ-2200.
• Before performing maintenance or service on the DJ-2200, position it at the front of the
dispensing chamber. This will provide easy access to components and limit exposure to
hazardous areas.
• Immediately push the red Emergency Machine Off (EMO) button on your dispensing system if
personnel are in danger.
• Do not touch the moving parts while the dispensing system is operating.
• Follow Material Safety Data Sheet (MSDS) recommendations for the proper handling of
hazardous materials.
• Remove the DJ-2200 completely from the dispensing system and allow the heated parts to cool
before cleaning or performing maintenance.
• Relieve pneumatic pressure before adjusting or servicing pressurized components.