Manual

4 Safety
Preventing Equipment and Workpiece Damage
• Immediately push the EMO button on the dispensing system if the dispensing system, DJ-2200,
or a workpiece is in danger of being damaged.
• Use standard Electrostatic Discharge (ESD) precautions when working near sensitive
components. Always wear a grounding strap and connect it to the ESD ground before handling
workpieces and equipment.
• Perform all recommended DJ-2200 maintenance procedures at the suggested intervals.
• Immediately contain and clean up any caustic or conductive fluid spills as recommended in the
material manufacturer’s MSDS.
• If fluid gets into internal portions of the DJ-2200, immediately contact Nordson ASYMTEK
Technical Support.
• Use only replacement parts that are designed for use with the original equipment. See the
Additional Information section for an illustrated parts list.
CAUTION! The DispenseJet Series DJ-2200 is a precision instrument of inherently safe design.
The use of any dispensing fluid and the related choice of solvent for cleaning, as
well as all associated safety precautions is the responsibility of the end-user.
Consult with your fluid supplier for recommendations on personal protective
equipment and safety practices.