Manual

Installation 5
3 Installation
Overview
The DJ-2200 is designed for use on Nordson ASYMTEK Century C-730 and Millennium M-2000 Flux
Dispensing Systems. This section covers:
• Unpacking the DJ-2200
• Installing the DJ-2200
Unpacking the DJ-2200
Every care has been taken when packaging your DJ-2200. However, we recommend that you look for
obvious damage and verify contents against the packing slip.
Retain the case for storage of DJ-2200 and accessories. Retain shipping cartons for future use. If an item
needs to be returned to Nordson ASYMTEK, obtain a Return Material Authorization (RMA) from Nordson
ASYMTEK Customer Service before returning the parts.
Installing the DJ-2200
If the DJ-2200 was factory installed with the dispensing system, you can proceed directly to the Operation
section in this manual.
The following instructions are for the C-730 Dispensing System. Installations to other dispensing systems
may vary slightly.
Tools and Material Needed
• Adjustment and Assembly Tools
• Torque Wrench
• Nozzles
CAUTION! The DJ-2200 Series DispenseJet is a delicate precision instrument. Exercise care
when installing the DispenseJet. Failure to do so may cause damage to the
DispenseJet. Installation should be performed by trained personnel only.