Manual

3-16 Tour of Easy Coat
To adjust the fluid pressure (Edit Screen):
1. Move the applicable tool over the purge cup.
2. Select
Utilities > Pressure Adjust from the ECXP Edit Screen (Figure 3-10).
3. Select the applicable tool.
 The Pressure Outputs dialog box opens (Figure 3-11).
4. Set the desired pressure and click
On or Pulse.
 NOTE For systems equipped with Fan Width Control (FWC) , the pressure defined by FWC to
achieve a specific width takes precedence over pressure set in
Utilities>Pressure Adjust.
Figure 3-10 ECXP Edit Screen - Pressure Adjust
Figure 3-11 Pressure Outputs Dialog Box