Manual

Setup and Configuration 6-31
Prompted Setup
Prompted Setup is generally the most frequently used setup procedure. It should be
performed prior to all production runs, after changing the needle or valve, and if you are
experiencing inaccurate dispensing.
?NOTE If you have a DP-2000 Dispensing Pump installed on your system, you will
need to use FMWTools to configure your dispensing system for the
DP-2000 before running a Prompted Setup. Please contact Asymtek
Technical Support for more information.
?NOTE If you have a Dual-Action or a Dual-Bracket dispensing head, it is
recommended that you use the Scripted Prompted Setup described below.
To perform a Prompted Setup routine:
1. In the FMW Main Window, click on Configuration.
2. Select Prompted Setup Options from the Configuration menu.
> The Prompted Setup Options dialog box, shown in Figure 6-9, opens.