Manual

Beginning Programming 6-15
4. Move the camera crosshairs to the center of the upper left circle in the Pot diagram on the
tutorial board.
5. Click
Teach.
!The next line in your program should appear similar to the one below.
POT: 1, 20.000, (2.171, 3.418)
To program area fill:
1. Click on
Dispensing Elements from the Program Commands toolbar.
2. Select
Area Fill from the Dispensing Elements Toolbar.
!The Teach Window will open.
3. Type
0.1 in the Spacing text box as shown in Figure 6-6.
!This is the spacing between each line as shown in Figure 6-7.
Figure 6-6 Teaching Area Fill
Figure 6-7 Area Fill
Corner 1
Spacing
between lines
Corner 2