Manual

Beginning Programming 6-17
3. Type 20 mg in the Total Weight text box.
!Entering 20 mg means that 20 mg of fluid will be dispensed along the length of the line
you will now define.
4. Move the camera crosshairs to the beginning of the bottom Basic Line on Side 1 of the
Tutorial Board.
5. Click on
Teach.
6. Move the camera crosshairs to the end of the line.
7. Click on
Teach.
8. Click on Done.
!A message box opens, indicating the calculated line speed for the newly created weight
control line.
9. Click on
OK.
To save a program:
1. Click on File>Save from the menu bar.
!You may also click the
Save button on the toolbar.
2. Enter
Program1 for the filename.
3. Click
OK.
" NOTE It is a good idea to save your program often. You may want to save after each
dispensing element has been programmed. After you have saved the program
once, simply click on the
Save button to save it again.
!Your program should now look similar to the one in Figure 6-9.