Manual

System Configuration and Setup 4-29
4. Click on Edit to open the Valve Settings dialog box where you can configure specific settings
for valve operation, including valve speed and fluid pressure.
5. Click on
Delete to remove valve types no longer used on your dispensing system.
6. Click on
New to add a valve type not included on the list.
7. If your dispensing system is equipped with a Low Fluid Sensor, click the
Low Fluid Sensor
Installed
checkbox to activate this feature.
8. If your dispensing system is equipped with Dual Valves, click the
Enable Dual Valves
checkbox to activate.
!Enter the Toggle Delay..
! Repeat step 3 above for Valve 2.
9. Click on
OK.
"NOTE A message box opens indicating that you must restart FmNT for the new changes
to take effect. You are also asked if you want to restart FmNT now. You do not
have to restart FmNT until you have finished configuring the dispensing system.
However, it should be noted that access to some of the features in the software
will be unavailable until FmNT is restarted. Click on
No every time you see this
message until Valve Setup is complete.