Instruction Manual

Backup and Restoration 7-7
7.2 Backup of Touchscreen Code
The touchscreen code can be transferred between the Omron touchscreen and a USB flash drive. This
procedure does not require a computer or cables.
 NOTE The touchscreen code does not contain any recipe or global variables.
Tools and Materials Needed:
 USB Drive (not included with MH-900)
To transfer code from the touchscreen to the USB drive:
1. Power on the MH-900.
2. Insert a USB drive into USB slot behind touchscreen.
Figure 7-7 Inserting the USB Flash Drive
3. Select the F6 button on right side of touchscreen.
 The Transfer Menu should open (Figure 7-9).
 NOTE If touchscreen does not respond, navigate to the home screen and press
F6 again. If navigating to the home screen is not possible, turn the machine
power OFF and ON, and then press the F6 button repeatedly while the
touchscreen and PLC are initializing.
Figure 7-8 F6 Button