Instruction Manual

Specifications 8-1
8 Specifications
8.1 Overview
To ensure optimal performance and safety, you must install the MH-900 in a facility that meets or exceeds
the requirements listed in Table 8-1. All facility power sources must be safely grounded.
8.2 System Specifications
WARNING! CAUTION!
Make sure that your facility meets the requirements below. Failure to meet these requirements
could cause serious bodily harm to the user and serious damage to the MH-900.
Table 8-1 System Specifications
Requirements MH-900
Footprint 625 x 1250mm (24.6 x 49.2 inch)
Height 1530 mm (60.2 inch)
Power
Voltage Supply: 100-240V (± 10% line variation)
Frequency: 50-60 Hz
Energy Consumption
Idle: 96 VA @ 120 V
Average: 128 VA @ 120 V
Peak: 1200 VA @ 120 V peak
Installation (Overvoltage Category) Category II
Load Current Rating of Factory Supply 10A @ 120V
Air Pressure 552 kPa (80 psi)
Air Consumption 3.4 m
3
/hr (2 scfm)
System Control and Operator Interface
Loadermove Touch™ Software
10-program storage
PLC and 147 mm (5.8 in.) Touch Screen
Conveyor
Stepper Motor Drive
SMEMA Conveyor Interface
Average Shipping Weight 230 kg (507 lbs.)
Operation and Storage Conditions
For indoor use only
Temperature range: 5-40 °C
Humidity: 25-80% RH
Altitude: Up to 2000m
Pollution Degree: 2
System Noise 71 db
Standards Compliance SMEMA, CE, SEMI-S2, SEMI-S8, NFPA 79