Instruction Manual

8-2 Specifications
8.3 Carrier Dimensions
Minimum and maximum carrier dimensions are listed in Table 8-2. Carriers must be flat and cannot be
more that 25 mm (1.0-inch) shorter than the magazine. Special length accommodations are available
upon request.
Table 8-2 Accommodated Carrier Dimensions
Type Size
Magazine Width Min: 15 mm (0.59 inch), Max: 172 mm (6.77 inch)
Magazine Length Min: 50.8 mm (2.0 inch), Max: 317.5 mm (12.5 inch)
Magazine Height
Min: 50.8 mm (2.0 inch)
Max: 270 mm (10.6 inch) – Upper Platform
Max: 200 mm (7.9 inch) – Lower Platform
No. of Parts/Magazine Min: 1, Max: 99
No. of Magazines
Min: 1, Max: 12 (MH-912L, MH-912U)/ 6 (MH-912S) per
platform
Part length: Min: 50.4 mm (2.0 inch), Max: 317.5 mm (12.5 inch)
Part width: Min: 15 mm (0.59 inch), Max: 160 mm (6.30 inch)
Part Thickness Min: 100 microns (0,004 inch), Max: 18 mm (0.71 inch)
Minimum Magazine Pitch
(Vertical Part spacing within magazine)
2.5 mm (0.100 inch)
Underboard Clearance 25 mm @ 3 mm (0.98 @ 0.12 in.) from edge of part
Overboard Clearance 25 mm @ 3 mm (0.98 @ 0.12 in.) from edge of part
Required Edge Clearance 3 mm (0,12 inch)
Magazine Weight Max: 6.8 kg (15 lbs)
Carrier Weight Max: 0.9 kg (2 lbs)
Elevator Payload Max: 40 kg (88 lb)