Instruction Manual

Introduction 1-7
1.5.2.2 Unloading Area
Item Name Description
1 Conveyor
The Conveyor transports the carrier to the production equipment via a
conveyor belt. The default conveyor setup supports carrier lengths less
than 216 mm. For longer lengths (more than 216 mm), the conveyor
belt needs to be extended. This is achieved by manually transforming
the extendable track and changing the belt.
2 Shuttle
The Shuttle moves back and forth, shuttling the conveyor to accept
carriers from a maximum of two (2) input positions. The pickup and
destination positions are user-programmable and the carriers can be
transferred in user-defined sequence for customized operation
procedures.
3
Carrier In Sensor The Carrier In sensor detects the frame once it arrives at the conveyor.
4
Conveyor Motor The Conveyor Motor turns the conveyor belts.
5
Shuttle Sensors The Shuttle has one limit sensor and one home sensor.
Figure 1-6 Unloading Area
2
4
5
1
3