Instruction Manual

Safety 2-3
2.3.2 Material Safety
• Follow Material Safety Data Sheet (MSDS) recommendations for the proper handling,
cleanup, and disposal of hazardous materials.
• Know the MSDS recommendations for treatment of injury resulting from exposure to
hazardous materials.
• When working with multiple fluids, refer to the MSDS to ensure the materials are
compatible.
2.3.3 Preventing Dispensing System and Workpiece Damage
• Immediately push the EMO button if the dispensing system, MH-900, or a workpiece is in
danger of being damaged.
• Use standard Electrostatic Discharge (ESD) precautions when working near sensitive
components. Always wear a grounding strap and connect it to the ESD ground before
handling workpieces.
• Immediately contain and clean up any caustic or conductive fluid spills as recommended in
the material manufacturer’s MSDS. If fluid gets into internal portions of the machine,
immediately contact Nordson ASYMTEK Technical Support.
• Follow all recommended system maintenance procedures.
• Always keep the dispensing area clear of any fallen workpieces or obstacles.
• Ensure that no air intakes or exhaust grilles are blocked when the system is in operation.
2.4 Disposal
Dispose of equipment and materials used in operation and servicing in accordance with local regulations.
2.5 Earthquake Precautions
In the event of an earthquake, your MH-900 must be secured to prevent movement that could cause
injury to personnel and damage to the dispensing system and facility. See 3.8 Anchoring the MH-900.