Instruction Manual

2-8 Safety

2.8 Emergency Shutdown

In the event of an emergency or malfunction, press one of the EMO buttons (Figure 2-6). Pressing the

EMO on the MH-900 turns OFF two relays in the Main Power System.

 NOTE The system may be configured to cut power to both the MH-900 and the dispensing

system when the EMO button is pressed. The Nordson ASYMTEK Dispensing System

also provides that capability.

Item Description

1 Front EMO

2 Rear EMO

Figure 2-6 Emergency Machine Off Buttons

WARNING! In an emergency, failure to completely shut down power to the MH-900 with the

EMO can cause serious injury to the user and/or damage to the system.

2.8.1 Emergency Shutdown Situations

As a minimum, activate the EMO in the following situations:

 If anyone is in immediate danger of being injured by moving parts, hazardous materials, or

electrical shock.

 If valuable components or the work pieces are in danger of being damaged.

2.8.2 Emergency Shutdown Recovery

WARNING! Do not restart the MH-900 operation until the condition that caused the

emergency shutdown has been fixed. Failure to comply could cause serious

injury to the user and/or serious damage to the system.

To restore power after a MH-900 Emergency Shutdown:

1. Push all carriers completely into their magazine slots.

2. Turn the EMO on the MH-900 to the right until it pops back into position.

3. Press the ON button on the MH-900 Control Panel. See Figure 1-8.