Instruction Manual

3-16 Installation and Setup
Item Description
1 Carrier In Sensor Bracket Screws
2 Carrier In Sensor
Figure 3-24 Carrier In Conveyor Sensor Position - Loader
f. Using your fingers, push the carrier out to the other end of the conveyor to verify the
correct alignment. Readjust the alignment if necessary.
g. Repeat Steps 3e to 3f for the Carrier Out sensor.
Item Description
1 Carrier Out Sensor
2 Carrier Out Sensor Bracket Screws
Figure 3-25 Carrier Out Conveyor Sensor Position - Loader
1
2
2
1