Instruction Manual

3-26 Installation and Setup
3.9.4 Jog Setup
Jog Setup lets you set fast and slow jog speeds for the elevator and shuttle. You can also set elevator
and shuttle travel distances through this menu.
Figure 3-39 Jog Speed Configuration Window
1. Enter the desired jog configuration values. See Table 3-4 for a description of options.
Table 3-4 Jog Screen Configuration Options
Name Description
Elevator/Shuttle Speed Speed during jog move
Short Elevator/Shuttle Distance
Distance traveled per move when pushing
‘Single Arrow’ jog button
Long Elevator/Shuttle Distance
Distance traveled per move when pushing
‘Double Arrow’ jog button
Holdown Time
Time required to hold down jog button
before Holdown Distance Multiplier takes
effect
Holdown Dist. Multiplier
Multiplies the distance traveled per jog
move after the user continuously presses
the jog button for Holdown Time duration
2. Press to open the Jog Screen.
 The Jog Screen lets you manually move the shuttle and elevator to test the Jog
settings. See Table 3-5 for button descriptions.
3. Press
to return to the Configuration Menu.