Instruction Manual

3-30 Installation and Setup
3.9.6 Preferences
Preferences lets you set beacon and jog-mode preferences.
Figure 3-45 Preferences
1. Select the desired preferences. See Table 3-6 for a description of options.
2. Press
to return to the Configuration Menu.
Table 3-6 Preferences Options
Name Description
Pause State Beacon Lamp
Color
Selects the desired color of beacon when MH-900 is in
Pause state. Yellow is the typical beacon color during
Pause state.
Disable Gripper/Pusher Down
If Part On Conveyor
Disables the gripper/pusher down function if part is
detected on conveyor during Jog Mode.