Instruction Manual

Installation and Setup 3-31
3.9.7 Optional Conveyor Configuration for Long Carriers
Carriers greater than 250 mm (9.84 in) in length will require the conveyor rails to be converted to their
extended configuration.
To extend conveyor rails:
1. Disassemble the rail as follows (Figure 3-46):
a. Remove the two (2) rail brackets.
b. Remove the two (2) black conveyor belts.
c. Loosen the senor bracket and allow it to hang loosely.
Item Description
1 Rail Bracket
2 Conveyor Belt
3 Sensor Bracket
Figure 3-46 Standard Conveyor Rail Configuration
1
2
3