Instruction Manual

4-6 Operation
4.5 Startup/Shutdown
4.5.1 Startup
To power on the MH-900:
Figure 4-4 Main Power Circuit Breaker
1. Turn the Main Power Circuit Breaker, located on
the back of the MH-900 to the ON (l) position.
2. Ensure the bypass plug is connected to the
‘DISPENSER I/O’ connector on rear side of the
machine.
3. If the EMO on the MH-900 has been activated,
turn it to the right until it pops back into position.
4. Press the ON (I) button on the MH-900 Control
Panel.
4.5.2 Shutdown
To shutdown the MH-900:
1. Wait until the current program is complete or press the Stop button to stop the program.
2. Press the OFF (O) Button on the MH-900 Control Panel.
4.6 Creating a New Recipe
 NOTE Before teaching a new recipe, complete the Hardware Setup process. See 3.9.1
Hardware Setup.
To create a new recipe:
1. From the Loadermove Touch Main Menu (Figure 3-15), press Teach a Program .
 You may be prompted for a password.
 The machine will initialize and the Teach Window (Figure 4-5) will open.
Figure 4-5 Teach Window
2. Select New Recipe.