Instruction Manual

Operation 4-7
Shuttle Lane 1 Position
Figure 4-6 Teach Shuttle Output 1
1. Place a part onto the shuttle conveyor.
2. Jog the shuttle to align with Lane 1.
a. Press
to open the Jog Screen (Figure 3-40).
b. Use the shuttle arrows keys to move the shuttle to Output Lane 1.
3. Activate the conveyor belt to test alignment.
 The conveyor belt is activated from the Jog Screen.
4. Press
to close the Jog Screen and return to the Teaching Shuttle Output 1 window.
5. Press
Teach.
 The shuttle position will be displayed on the screen.
6. Touch the GO button to move to the taught position to verify the correct location.