Instruction Manual

4-22 Operation
5. Verify that the correct recipe is selected. By default, the last selected recipe will be used.
 The current recipe name will be displayed at the top right of the Run Window.
WARNING! An incorrect recipe may damage the carriers and/or equipment.
6. If the wrong recipe is selected, press to go back to the Production Window and load
the correct recipe. See 4.9 Loading a Recipe.
7. Select Load Mags
to position the elevator in the upper-most position and the shuttle
in the front of the machine.
WARNING! Loading magazines without first selecting Load Mags can result in damage to
carriers and/or equipment.
8. Load the magazines on the magazine platforms.
Figure-4-26 Adding Magazines Figure-4-27 Removing Magazines
 Loader magazines should be full of carriers.
 Unloader magazines should be empty.
 Same-side magazines can be loaded according to the “zone” or “alternating” option
selected in the recipe programming procedure. See 4.6 Creating a New Recipe.
- Zone: full magazines in front half of elevator table, empty magazines in rear.
- Alternating: full and empty magazines are alternated.