Instruction Manual

Operation 4-23
Zone Alternating
Item Description
1 Full Magazine
2 Empty Magazine
Figure-4-28 Zone vs. Alternating
 NOTE The loader, unloader, and same side loaders will accommodate partially full magazines.
When loading, empty carrier slots will be detected by the part sensor and skipped over.
When unloading, full carrier slots will be detected by part sensor and skipped over.
9. Press
to start the production run.
10. The conveyor will make a short move to check for part on conveyor. If part is detected on
the conveyor, the user will be prompted to clear the part from the conveyor (Figure 4-29).
Figure 4-29 Clear Conveyor Warning
11. The light beacon green light will turn on to indicate the production run mode.
12. Press
to pause, and to stop production.
13. Press
to return to the Production Window.
 NOTE If an error occurs during a production run, a window will open displaying an error
message. See 6.4 Error Messages for suggested corrective actions.
1
2
1
2
1
1
2
2