Instruction Manual

5-4 Maintenance and Service
5.8 Removal and Replacement of Access Panels
To remove the panels:
 NOTE Remove the panels in the following sequence. As you remove each panel, lift it up and
away from the MH-900.
1. Detach the 2 retaining screws from the top of the front panel and remove the panel.
2. Detach the 2 retaining screws from the top of the lower left panel and remove the panel.
3. Detach the 2 retaining screws from the top of the upper rear panel and remove the panel.
4. Detach the 2 retaining screws from the top of the lower rear panel and remove the panel.
5. Detach the 4 retaining screws from the top of the lower right panel and remove the panel.
Item Description Item Description
1
Upper Rear Panel
4
Front Panel
2
Lower Rear Panel
5
Lower Left Panel
3
Lower Right Panel
Figure 5-1 MH-900 Frame, Service Panels Shown Removed
1
2
3
4
5