Instruction Manual

Troubleshooting 6-5
6.5 I/O Test
The I/O Test screens can be used to help diagnose problems by observing input bit states and/or toggling
certain output bits.
To access I/O Test screens:
1. From the Loadermove Touch Main Menu, Press Tools .
 You will be prompted to enter a password. Enter the password and all buttons will be
enabled.
 The Tools Window (Figure 6-2) opens.
Figure 6-2 Tools Window
WARNING! CAUTION!
Failure to adhere to Safety the safety procedures outlined in Section 2 - Safety
could result in personal injury or damage to the system.
2. Select the IO Test button from Tools Menu.
 The IO Test Input 1 window (Figure 6-3) opens.
 A green button indicates the input is ON. A red button indicates the input is OFF.