Owner's manual

Table B-1 Collection Events (Continued)
B-8 Appendix B - Collection Events
Collection Event Name CEID
Related
Data Variables
Description
ce_PrimePass 3741 None
Collection event when prime SECS/GEM remote command completes
successfully.
ce_LocateServiceStationPass 3742 None
Collection event when locate service station SECS/GEM remote
command completes successfully.
ce_MoveHomeLocationPass 3743 None
Collection event when move home location SECS/GEM remote
command completes successfully.
ce_MovePurgeLocationPass 3744 None Not used.
ce_PrelimNeedleToCameraPass 3745 None
Collection event when preliminary needle to camera offsets SECS/GEM
remote command completes successfully.
ce_DJ9KVAPrimePass 3746 None
Collection event when DJ9000 vacuum assisted prime SECS/GEM
remote command completes successfully.
ce_NdlAtTactileZ_V2 3747 527 Collection event when needle at tactile Z position is set.
ce_HSAtPurgeLidZ 3748 528 Collection event when height sense at purge lid Z position is set.
ce_DJOffsetCalibrationPass 3749 None
Collection event when DJ offset calibration SECS/GEM remote
command completes successfully.
ce_LoadBoardConv1Pass 3750 None
Collection event when SECS/GEM remote command to load board on
conveyor 1 completes successfully.
ce_LoadBoardConv2Pass 3751 None
Collection event when SECS/GEM remote command to load board on
conveyor 2 completes successfully.
ce_MoveCenterLocationPass 3752 None
Collection event when SECS/GEM remote command “MOVE CENTER”
completes successfully.
ce_MoveFrontLocationPass 3753 None
Collection event when SECS/GEM remote command “MOVE FRONT”
completes successfully.
ce_ResetElapsedPurgeTime 3754 None Not used.
ce_SetPurgeCupOverflowTime 3755 None Not used.
ce_VacuumOnPass 3756 None
Collection event when SECS/GEM remote command “VACUUM ON”
completes successfully.