Owner's manual

F-88 Appendix F - Variables Grouped by Fluidmove Activity
F.33 Load Board – Remote Command
Load Board is a script command used to load boards onto the conveyor. The SECS/GEM host can start this process with a remote command sent to the
client machine. The following tables describe the SECS/GEM remote command and variables related Load Board.
Table F.33-1 Load Board – Remote Command
Remote Command CEID
Related Data
Variables
Description
Remote Command String =
“LOAD BOARD 1” or
“LOAD BOARD 2”
---
Remote control command to load board on conveyor 1 or conveyor 2.
3750 ce_LoadBoardConv1Pass
3751 ce_LoadBoardConv2Pass
3774 ce_LoadBoardConv1Fail
3775 ce_LoadBoardConv2Fail
Usage Scenario
The SECS/GEM host starts the Load Board process by sending the remote command Load Board 1 or Load Board 2 to the dispensing tool. After the
offsets process is finished, collection event 3750 or 3751 is triggered to notify the host.