Owner's manual

Introduction 1-19
1.11.8 Fluidmove Run Window Interface
The Fluidmove Run Window includes a SECS/GEM tab that shows communication status and allows
messages to be sent between the Host and the Operator. This tab is described in Figure 1-7.
Item Name Description
1
Incoming
Message
Messages from the Host are displayed in this box.
2 Acknowledge Click to acknowledge receipt of the incoming message from the Host.
3
Outgoing
Message
Enter messages to the Host in this box.
4 Send Click to send the message in the Outgoing Message box to the Host.
5 Status Box Displays the current communication state, control state, and spooling state.
6 GEM Status Bar
COMM:
Displays the GEM communication state of the program.
CTRL:
Displays the control state of the program.
SPOOL:
Displays the spooling state of the program.
7
SECS/GEM
Communication
Indicator
A green button is present when the communication link is established.
Otherwise, the button is not displayed.
Figure 1-7 Run Window – SECS/GEM Tab (FmXP shown)
4
7
5
6
2
1
3