Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-161
Table F.66-1 Additional Configuration Parameter Variables (Continued)
Variable Name ID
Storage
Type
Class
Related
CEID
Description/Default
Setup Vision – New Program Defaults
c_DfltImagesettlingtime 6750 I4 EC None Post move settling time
p_BatchFids 11614 A[4] DV 3672 Find fids at program start
c_DfltUsePipeline 6146 A[4] EC None Use pipeline vision
Setup Workpiece Alignment
c_LearnWorkpieceAngle 6674 A[4] EC None Learn WP angle first
c_WorkpieceNumberOfFids 6675 I4 EC None Number of fiducials
c_VerifyWkpcOrgNoFids
6676 A[4] EC None
Verify WP origin when opening program with no
fids.
Setup Conveyor 1
c_ConveyorControlType_C1 6114 A[20] EC None Conveyor 1 control type
c_ConveyorMode_C1
6117 I4 EC None
Disabled = 0, Run Continuous = 1, Pass Through =
2
c_StartupFileName_C1 6134 A[60] EC None Conveyor startup filename
c_StyleType_C1 6116 A[100] EC None Conveyor style
c_BeltSpeed_C1 6127 A[30] EC None Belt speed
c_BeltAccel_C1 6128 A[30] EC None Belt acceleration
c_LongMove_C1 6129 A[30] EC None Long move
c_ShortMove_C1 6130 A[30] EC None Short move
c_Retries_C1 6131 A[30] EC None Retries
c_BackMove_C1 6132 A[30] EC None Back move
c_TwinConveyorWait_C1 6126 I4 EC None Wait for 2
nd
board time( dual conveyor)
c_ConfirmACWMove 6113 A[4] EC None Confirm move to taught width
c_ConveyorWidthSpeed 6754 A[30] EC None Conveyor width speed
c_ConveyorWidthAccel 6755 A[30] EC None Conveyor width accel