User Manual

Maintenance 7-5

7.8 Cleaning the Fluid Filter

WARNING! CAUTION!

Follow MSDS recommendations for the proper handling and disposal of all

materials when cleaning the fluid filter. Always wear appropriate personal

protective equipment (PPE) as recommended by facility safety practices and the

material manufacturer’s MSDS. To prevent eye injury or irritation, wear safety

goggles while performing this procedure.

To clean the fluid filter:

1. Turn the Reservoir Air Pressure Switch to the

OFF (0) position. See Figure 7-3.

2. Relieve residual pressure in the fluid system by opening the pressure relief valve on the

fluid reservoir.

Figure 7-3A Coating System Rear Panel

Figure 7-3B Fluid Reservoir

Item Description

1 Reservoir Air Pressure Switch (right rear)

2 Fluid Reservoir Pressure Relief Valve

Figure 7-3 Relieving the Air Pressure