User Manual

7-6 Maintenance

3. Drain fluid from the filter assembly by opening the ball valve.

4. Unscrew the fluid filter cap (Figure 7-4).

 The fluid filter is located inside the housing.

5. Remove the filter and clean it with a proper solvent.

6. Brush the stainless steel screen with the appropriate solvent. Replace if necessary.

7. Blow filter surface with compressed air.

8. When finished, reassemble the filter and turn the Reservoir Air Pressure Switch to the

Reservoir A or Reservoir B position as applicable.

Item Description

1 Fluid Filter Spring

2 Fluid Filter

3 Housing

4 Ball Valve

Figure 7-4 Cleaning the Fluid Filter