User Manual

Maintenance 7-7
7.9 Removing the Axis Covers
In order to lubricate the cables, it will be necessary to remove the axis and rear cable covers.
To remove the X-axis cable covers:
1. Use a 4-mm hex key to loosen the screws in the back (Figure 7-5).
2. Lift off.
Figure 7-5 Removing the X-Axis Covers
To remove the Y-axis cable covers:
1. Use a 4-mm hex key to loosen the screws (Figure 7-6).
2. Lift off.
Figure 7-6 Removing the Y-Axis Covers