User Manual

Safety 2-1
2 Safety
2.1 Overview
This section is intended to provide basic safety information necessary for operating and servicing the
Select Coat SL-940E/SL-941E Series Conformal Coating System. This section covers the following
topics:
•
Intended Use
•
Emergency Shutdown
•
Basic Safety Precautions and Practices
•
Interlock
•
Lifting
and Transport Precautions
•
Service Shutdown
•
Laser Radiation
•
Lockout of Electrical and Pneumatic Energy
•
Earthquake Precautions
•
Light Beacon
•
Safety Warning Labels
To further optimize safe coating system operation, precautions and recommended practices are included
with the procedures throughout this manual.
WARNING! CAUTION!
Unsafe equipment conditions can result in personal injury or property damage.
Failure to properly operate and maintain the system in accordance with this manual
could cause the built-in safety features to be ineffective.
 NOTE Safety is considered a joint responsibility between the original equipment manufacturer
(Nordson ASYMTEK) and the end-user (owner). All safety precautions and practices
should be in accordance with local regulations and facility policy.
2.2 Facility Requirements
To ensure optimal performance and safety, it is necessary to install the coating system in a facility that
meets the necessary requirements listed in Section 10 - Specifications. If you have any questions, please
contact Nordson ASYMTEK Technical Support.
2.3 Intended Use
Use of Nordson ASYMTEK equipment in ways other than those described in the documentation supplied
with the equipment may result in injury to persons or damage to property. Some examples of unintended
use of equipment include:
• Using incompatible materials
• Making unauthorized modifications
• Removing or bypassing safety guards or interlocks
• Using incompatible or damaged parts
• Using unapproved auxiliary equipment
• Operating equipment in excess of maximum ratings