User Manual

2-6 Safety
2.9 Safety Warning Labels
WARNING! CAUTION!
Comply with all safety warning labels or serious injury to personnel or damage to
the coating system may occur. Worn or damaged labels should be replaced with
new labels having the same part number.
Warning labels on your Select Coat SL-940E/SL-941E point out areas where personnel must use extreme
caution to prevent serious injury and property damage. Table 2-2 shows the warning symbols that may be
found on your coating system or optional equipment. The location of warning labels found on a typical
SL-940E/SL-941E is shown in Figure 2-2 and Figure 2-4.
Table 2-2 Safety Warning Symbols
Warning Type Symbol
Part
Number
Hazard
Consult
Operator’s
Manual
7206854
Warns personnel to read Operator’s Manual before
operating machine.
Electrical
(Shock Hazard)
70-0116-00
(1)
or
70-0050-00
(2)
This label warns of a high-voltage component that can
cause shock, burn, or death. Use extreme caution
when working in or around these areas. Disconnect
and lock out power before servicing.
General
Warning
70-0055-00
This label identifies a component that requires special
attention. Can cause serious bodily harm to the user.
Hand
Entanglement/
Moving
Material
7214364
(1)
This label warns of moving parts that can cause
serious injury to hands and fingers.
Disconnect and lock out power before servicing.
Heavy Object
(Lifting Hazard)
70-0118-00
(1)
or
196666
(2)
This label warns that the labeled component is heavy
and can cause muscle strain or back injury to
personnel trying to lift it.
Hot Surface
70-0121-00
(1)
or
70-2150-00
(2)
Thermal warning labels identify potentially hot
components and surfaces. Use extreme caution when
working on or around these areas. Can cause severe
burns.
Laser Radiation
Warning
7206858
(2)
This label warns of the possibility of hazardous
radiation exposure.
Moving Parts
Present
70-0120-00
(1)
or
198883
(2)
This label warns of moving parts that can cause
serious injury to hands or fingers. Keep hands away
from moving parts. Disconnect and lock out power
before servicing.
Pressure Relief
Warning
322352
This label warns that the pressure relief valve should
be pulled before performing service on the pneumatic
system or opening the fluid reservoir.
Notes: (1) Rectangular labels with symbols and text. These labels are placed on machines that are shipped anywhere but the
European community.
(2) Triangular labels with symbols only. These labels are placed on machines that are shipped to the European
community, referred to as “CE labeled” machines.