User Manual

3-4 Installation

3.4 Unpacking the Coating Area

To unpack the Coating Area:

1. Remove all tie wraps, tape, foam packing material, and warning tags from the following

areas:

• Dispensing Head (Robot)

• Conveyor

 NOTE Location of packaging materials to be removed is indicated by the presence of

red warning tags. The amount, type, and arrangement of packaging materials

will depend on your system’s configuration.

2. Loosen the 3 mm setscrews on the X- and Y-axis Dispensing Head Stoppers.

See Figure 3-3.

3. Remove the stoppers and retain them in a safe place.

Item Description Item Description

1 Y-Axis Stopper 3 X-Axis Stopper

2 Y-Rail (right side) 4 X-Beam

Figure 3-3 Dispensing Head Stopper Locations