User Manual

4-2 Power-up and Testing
4.4 Electrical Connections
The coating system requires 200/240 VAC 50/60Hz, 10A.
 NOTE Refer to Section 10 - Specifications for more information on electrical requirements.
Contact your Nordson ASYMTEK representative for your particular system
requirements.
Refer to Appendix B for SL-940E/SL-941E electrical diagrams and electronic connections.
4.5 Exhaust Connection
The coating system requires a 15.3 cm (6 inch) diameter exhaust duct capable of drawing a minimum of
17 m
3
/min @ 25.4 mm water column (600 SCFM air at 1.0 inch water column) static pressure.
 NOTE Refer to Section 10 - Specifications for more information on exhaust requirements.
Contact your Nordson ASYMTEK representative for your particular system
requirements.