User Manual

Power-up and Testing 4-7
4.9 Starting Easy Coat for Windows (ECXP)
To start/exit ECXP:
1. Double click the ECXP
icon on the Windows desktop.
 As an alternative, you may click on the Windows
Start menu and select
Programs > ECXP to start the ECXP software.
 The Dispenser will find Home in the Z-Axis, X-Axis, and Y-Axis, respectively.
 The ECXP Operator Screen shown in Figure 4-4 will open.
 NOTE The Operator Screen will vary slightly depending on system configuration.
Figure 4-4 Starting ECXP
 NOTE If ECXP does not start, or you receive error messages during start-up, please
contact Nordson ASYMTEK Technical Support.
2. To exit ECXP, click on
or select File > Exit from the Operator Screen menu bar.
 NOTE Refer to Section 5 - Operation for instructions on loading and running ECXP programs.