User Manual

4-8 Power-up and Testing
4.10 Testing the System
After initial installation and power-up, the system must be tested to ensure that it is working properly.
This section includes the procedures for testing the following:
•
Robot/Conveyor I/O
•
Conveyor Function
•
Pneumatics
•
Coating System Options
•
Robot (Dispensing Head) Function
These procedures should be performed on initial installation and after the machine has been moved
or serviced.
CAUTION! The following procedures should only be performed by a trained service technician.
4.11 Robot/Conveyor I/O
To test the Robot I/O:
1. Follow the instructions in 4.9 Starting Easy Coat for Windows (ECXP) to start ECXP.
2. Select
Edit > Edit Mode from the ECXP Operator Screen menu bar to access the ECXP
Edit Screen.
3. Select
Utilities from the Edit Screen menu bar (Figure 4-5).
Figure 4-5 ECXP Edit Screen - Utilities Menu