CVK-SNRK Install Manual

-4-
Insert CVT-SNRK-90ELB into the 5”
diameter hole of upper part of
CVK-SNRK-C1. Install with the
proper length protruding through the
case.
Fasten CVK-SNRK-C1 and C2 with 6
or 8 screws provided. Keep the
distance between screws nearly
equal so that they are fixed firmly.
Properly seal between Case and the
outdoor wall.
Do not seal slit (drain) at the bottom
of CVK-SNRK-C2.
Use packing to seal when installed on
a not flat wall.
N-Vent
NORITZ AMERICA CORPORATION
11160 Grace Avenue, Fountain Valley, CA 92708
www.norit
z.com