Use and Care Manual

• When installing this Water Heater outdoors, the

“Outdoor Vent Cap (VC-6)” must be used.

• Refer to the instructions provided with Outdoor

Vent Cap for additional detail.

• Disconnect the electrical power and then turn ON

DIP switch #2 if outdoor installation.

Refer to page 56 for the location of the DIP switch

bank and how to change the DIP switch.

Failure to perform this step will result a “73” code

displayed on the Remote Controller and a cease

in operation.

If this occurs, disconnect, then reconnect the

electrical power to the Water Heater to reset the

system.

Here

6.6 Outdoor Installation

Venting the Water Heater