Use and Care Manual
15
Setting Domestic Hot Water Temperature (DHW)
(
°F
:
)
The temperature settings below are examples. The temperature setting
necessary depends on the usage, the length of piping and the time of year.
*Initial factory setting is 110°F
If xtures incorporate mixing valves, set the temperature higher than usual.
*
For most residential applications, the recommended temperature setting is 120°F (50°C in °C mode) or less.
* Consult local codes for minimum operating temperatures.
90 95 100 105 110 115 120 125 130 135 140
Shower, hot water supply, etc.
Washing
dishes, etc.
High temperature
The maximum output temperature
can be
set using the Operation Panel. ( p.20)
(
°C (°F)
:
)
The temperature settings below are examples. The temperature setting
necessary depends on the usage, the length of piping and the time of year.
*Initial factory setting is 40°C (104°F)
Shower, hot water supply, etc.
Washing
dishes, etc.
High
temperature
32 35 37 38 39 40 41 42 43 44 45 46 47 48
50 55 60
(90)
(95)
(99)
(100) (102) (104) (106) (108) (109) (111) (113) (115) (117) (118) (122) (131) (140)
The maximum output temperature
can be set using the Operation
Panel. ( p.20)
When using °F mode:
When using °C mode:
Note : Noritz recommends that water temperature is set as low as possible to prevent scale build-up in
the heat exchanger.