NR83 Owners Manual

14
How to Use
Flow Meter Alarm
3
2,3
1
2
Set temperature.
Press the Power
On/Off Button
Plug the bath drain.
Preparation
(Starting with the power off)
Always check
temperature setting
before use.
Hot
Cold
On
The temperature will be displayed
on the operation panel thermostat.
Previous set temperature (example:110°F)
On
Check the indicator lights.
Water temperature
1
If the ow meter alarm is being used to
indicate when a tub is full:
• If any hot water is being used besides
what is going into the tub, the alarm
will sound before the tub is full.
• If there was water in the tub before the
ll began, or if the water is not shut off
manually when the alarm sounds, the
tub may overow.
• If there was water in the tub before the
ll began, the temperature in the tub
after it is full may be different from the
temperature setting.
On
Check the indicator lights.
Water temperature
Previous set temperature (example:40°C)
When the display setting is in Celsius.
When the display
setting is in Fahrenheit.
( )