Use and Care Manual

NORITZ AMERICA CORPORATION

11160 Grace Avenue, Fountain Valley, CA 92708 Tel. 1-866-7NORITZ www.noritz.com

Combination Boiler Primary/Secondary Manifold Kit

Part# MK-CB-1

Compatible with Model CB180 or CB199

• Save installation time and cost with a pre-fabricated manifold kit.

• Optimize hydronic and radiant heating performance and overall efficiency.

• Features:

Made with type L copper tubing.

1” FNPT dielectric unions for Boiler Supply and Return.

3/4“ FPT with plug for heating accessories.

1” isolation valves and 3/4“ connection purge ports.

1-1/2” sweat connections on supply and return pipe.

Example Illustration

Expansion Tank

& Air Separator

Heating

Supply

Heating

Return

Pump

Feed

Domestic Cold Water

Domestic Hot Water

Heating Makeup Feed Water

PAGE 1
Combination Boiler Primary/Secondary Manifold Kit Part# MK-CB-1 Compatible with Model CB180 or CB199 • Save installation time and cost with a pre-fabricated manifold kit. • Optimize hydronic and radiant heating performance and overall efficiency. • Features: Made with type L copper tubing. 1” FNPT dielectric unions for Boiler Supply and Return. 3/4“ FPT with plug for heating accessories. 1” isolation valves and 3/4“ connection purge ports. 1-1/2” sweat connections on supply and return pipe.
PAGE 2
Dimensions 9.0 " 4.0 " 1" FNPT DIELECTRIC UNION 1" FNPT DIELECTRIC UNION 2.4" 1" L COPPER 3/4" FPT ADAPTER WITH PLUG 3/4" MPT CONNECTION WITH CAP AND GASKET (x 2) 1" L COPPER 17.2 " 1" FULL PORT BALL VALVE (x 2) 1-1/2" L COPPER 12.0 " ut notice. Rev.