NCC300 Owner's Guide

21
For All Systems
Automatic Water Heater “ON” or “OFF” Operation
Activate Automatic Operation
4
* If you do not press button,
the time setting is not completed.
*
If you want to change "ON/OFF
time", select "Reset" and then press
the
button, return to step 2.
Operation Screen Display Description
(Display Example)
1
button is "ON".
* The indicator is unlit.
button is "OFF".
To Deactivate Automatic Operation
Operation Screen Display Description
* If the button is not set to "OFF", the water heater will automatically turn "ON" or "OFF" at the set times.
* If there is a power failure or power is disconnected to the water heater, automatic operation will be
deactivated.
AM
10:00
PM
8:00
PM
8:00
AM
10:00
your desired time your desired time
Hint for operation
Follwing this procedure allows for automated control of water heater operation without user interaction.
* The setting time shown on the display of the remote controller is for example purposes only.
Ex. 1: Both "ON" and "OFF"
functions are automated.
Ex. 2: Only “ON” function is
automated.
Ex. 3: Only “OFF” function is
automated.
Automatically
turned "ON"
Automatically
turned "ON"
Automatically
turned "OFF"
Automatically
turned "OFF"
Manually
turned "OFF"
Manually
turned "ON"
Check "Set" is selected,
and then press button
to confirm all settings.
* You can activate automatic
operation regardless if the
button is “ON” or “OFF”.
*
indicator is lit when activated.
* "Start time" and "End time" will
be displayed upon activation.
* If both the "Start time" and "End
time" are set to "- : --", the alarm
sounds "Pi Pi Pi" and
is displayed.