NCC300 Owner's Guide

29
For
Setting the Recirculation System Operation Timer
5
Press the button to
complete the time settings.
4
Here
1)
2)
Lit
"Recirc timer" and "Recirc timer on" are altenately
displayed on the menu (approximately 10 seconds)
(Example of home screen when the power ON/OFF button is turned "ON")
1)
2)
* You can set multiple operation
time periods.
1)
2)
1)
2)
The screen returns to the Recirc Menu.
<Adding Additional Time Periods>
<Resetting All Time Periods>
Operation Screen Display Description
* If the button is "ON", the
screen returns to the home screen
in approximately 10 seconds.
* If the timer is deactivated during
a recirculation time period,
recirculation will continue
until it is stopped using the
procedure shown on p.27.
1) Carry out steps 1 to 2.
2) Select "Cancelled"
using the buttons
.
3) Press the button.
To Cancel the Recirculation System Operation Timer
* The timer will not activate without
pressing the
button.
*
If the time is not set, the time setting
screen is displayed (
p.17).
* Until the timer is deactivated, the
recirculation system will operate
daily at the set “Start” and “End”
times.
(All settings are cleared.)
3)
Adjust the time period following
the procedures in Steps 3 to 4.
1) Select "Add" using
the
buttons.
2) Press the
button.
3)
Select the time period following
the procedures in Steps 3 to 4.
*
Every time when you press the
button, the time changes by one hour.
[To keep the current “End” time]
Press the
button
without
changing the "End" time,
and proceed to step 5.
1) Select "AM8:00" using
the buttons.
2) Press the
button to
complete the “End”
time setting.
1) Select "Reset" using
the
buttons.
2) Press the
button.