Product Catalog

17
Stainless Steel Venting for SV and DV Models
SV
SV
DV
DV
N-Vent Horizontal Vent Kit
VK4-H-*
Specications & Features
• Stainless Steel
• 4” Diameter
• Flexibility for dierent wall
thicknesses
• Easy installation
• Professional appearance
Wall Thickness
4.1”- 7.4”
7.4”- 14”
Description
Wall Thimble with Built-in
Hood Termination
Vertical Adjustment
Range (7.5” - 11”)
Part Number
WT4-H-#-1 (# Based on wall thickness)
VP4-90ADJELB
Quantity
1
1
*Venting Kit Number
VK4-H-8-1
VK4-H-14-1
Adjustable
N-Vent Vertical Vent Kit
VK4-V1
Specications & Features
• Stainless Steel
• 4” Diameter
• Easy installation
• Professional appearance
Description
Drain Tee
90 Degree Elbow
Firestop
Support Clamp
Roof Jack
Storm Collar Pipe
Rain Cap
9”- 13.4” Adjustable Vent
Part Number
DT4
VP4-90ELB
FS4
SC4
RJ4
SCP4
RC4
VP4-13.4ADJ
Quantity
1
2
1
1
1
1
1
1
N-Vent Direct Vent Long Termination
Specications & Features
• Stainless Steel
• 4” Diameter
• Easy installation
• Professional appearance
Use a listed Category III vent adaptor to connect the ue collar to the vent system. Use Category III vent pipe for
the entire length of the exhaust pipe.
**Sleeve and termination (L2) can be adjusted in increments of 0.4 inch
Part Name
Vent
Termination
Type
Long
3.5”- 5.1”
5.1”- 8.3”
8.3”- 14.6”
14.6”- 27.2”
3.5”- 5.0”
5.0”- 8.0”
8.0”- 15.0”
15.0”- 27.0”
7.0”- 8.5”
8.5”- 12.0”
12.0”- 18.0”
18.0”- 30.5”
VT4-TL-5
VT4-TL-8
VT4-TL-14
VT4-TL-27
1
1
1
1
Wall Thickness Dimensions (inches)
Sleeve** Termination** (L2)
Part Number Qty/ Box
N-Vent Direct Vent Short Termination
Specications & Features
• Stainless Steel
• 4” Diameter
• Easy installation
• Professional appearance
Part Name
Vent
Termination
Type
Long
3.5”- 5.1”
5.1”- 8.3”
8.3”- 14.6”
14.6”- 27.2”
3.5”- 5.0”
5.0”- 8.0”
8.0”- 15.0”
15.0”- 27.0”
7.0”- 8.5”
8.5”- 12.0”
12.0”- 18.0”
18.0”- 30.5”
VT4-TS-5
VT4-TS-8
VT4-TS-14
VT4-TS-27
1
1
1
1
Wall Thickness
Dimensions (inches)
Sleeve** Termination** (L2)
Part Number
Qty/ Box
Components included in the Termination Kits are shown in bold and listed in the charts. Note: Additional venting components
will be needed to complete most vent runs. **Sleeve and termination (L2) can be adjusted in increments of 0.4 inch