Instructions / Assembly

NR98 Series

NC199 Series

NCC199 Series

NRC111 Series

Tankless Water Heater Accessories

Specification Sheet

Quick Connect Cord

NORITZ AMERICA CORPORATION

11160 Grace Avenue, Fountain Valley, CA 92708 Tel. 1-866-7NORITZ www.noritz.com

Quick Connect Cord

Models Compatible with QC-1

6 ft.

(Connector wiring colors)

Connector Cable

NR111 Series

NC250 Series

NC380 Series

Rev. 5/12

• Connects two identical water heater models together in

order to get twice the output of hot water

• Provides a communication link and rotates the operation

between the two units evenly

• Simple installation, just attach the cord to the proper

connectors inside each water heater

• Compatible with larger Residential models and ALL

Commercial models (see Compatibility Chart below)

Dimensions

Example Installation

Quick Connect Cord (#QC-1)

Quick Connect Cord (#QC-2)

Models Compatible with QC-2

NRC98 Series

NR50 Series

NR83 Series

NRC83 Series

NR981 Series

NRC1111 Series

NC1991 Series

NCC1991 Series

PAGE 1
Tankless Water Heater Accessories Specification Sheet Quick Connect Cord • Connects two identical water heater models together in order to get twice the output of hot water • Provides a communication link and rotates the operation between the two units evenly • Simple installation, just attach the cord to the proper connectors inside each water heater • Compatible with larger Residential models and ALL Commercial models (see Compatibility Chart below) Dimensions Quick Connect Cord Quick Connect Cord (#QC-
PAGE 2
Quick Connect Multi System Installation • The Quick Connect Multi System allows the installation of two units together utilizing only the Quick Connect Cord. The Quick Connect Cord is 6 ft. long. Install the units 2-18" apart from each other to ensure the cord will be able to reach between the units. (See Typical Plumbing diagram).
PAGE 3
For Quick Connect Multi System Installation use a Quick Connect Cord (sold separately). Connecting Quick Connect Cord Caution The wire coloring on the Quick Connect Cord will not be the same as the wire coloring of the connection plug inside the unit. * The remote controller can be connected to either unit A or B. Quick Connect Cord 1.Red 2.Black 3.White 4.Green 5.Blue 6.Blue 1.Red 2.Black 3.White 4.Green 5.Blue 6.Blue 1.White 2.Green 3.Red 4.Black 5.Blue 6.Blue A 1.Red 2.Black 3.White 4.Green 5.