Data Sheet

PART
DWG
L#1
11 1
D-D
s#0.1
13 1
9 0.3
W#5$
12 0.5
GENERAL TOLERANCE: DIN 6930-m
FORM AND POS. TOL.: DIN ISO 2768-K
DEVIATION FOR ANGLE: -
QUOTATION DRAWING
Teil-Nr.
ITEM-NO.
Stueck
QTY.
Benennung
PART - NAME
Werkstoff
MATERIAL
Oberflaeche
SURFACE
1 1
TORRO Gehaeuse 9
TORRO Housing 9
1.4016
AISI 430
blank
uncoated
2 1
TORRO Schraube 9
TORRO Screw 9
1.4016
AISI 430
verzinnt
tin plated
3 1
TORRO Band 9
TORRO Band 9
1.4016
AISI 430
blank
uncoated
4 1
TORRO Wellfeder 9
TORRO Spring 9
1.4310
AISI 301
CHECKEDDRAWNDATE
CHANGE-NO
REVISION SUMMARYQTY
DWGPART
INDEX
KraussRottenbach
2009-06-3001-607687Variante 85-105 (0127 0708 095) hinzu; Wellfedergeometrie ab n90 hinzu2F-
KraussRottenbach
2009-10-1401-607957Variante 32-52 (0127 0708 042) hinzu1G-
KraussRottenbach
2010-03-1801-608293Variante 16-28 (0127 0708 022) und 16-29 (0127 0708 023) hinzu2H-
LeusnerLantsmann2016-07-0601-613299Part no 0127 0708 053 (43-63) added1J-
KruegerPawar2016-07-2701-613339Part no updated 0127 0708 052 (42-62) was 0127 0708 053 (43-63)1K
-
1/2A3Q
K-
0127 0708 000
01270708000_QDRAWING-NAME.:
(C) COPYRIGHT NORMA GROUP
DIN ISO 16016
Creo 3.0 M090
SHEET
FORMATTYPE
INDEX
NORMA-NO.:CAD-SYSTEM:
--
NORMA Germany GmbH
Postfach 1149
63461 Maintal
9990001428
CUSTOMER-NO:
CUSTOMER:
PROJECT-NO.:
NORMACLAMP
TORRO D-D/9 A/F7 W3 WF
Schmidt2003-05-08
CHECKED
MM
Krauss2003-05-08
DRAWN
1:1
NAMEDATE: YYYY-MM-DD
SCALE:
PART NAME:
DIN EN ISO 1101
ACCORDING TO:1st ANGLE PROJECTION
Andrehmoment: L21: empfohlen 2 - 2.5 Nm
L24/26: empfohlen 3 - 3.5 Nm
Tightening torque: L21: recommended 2 - 2.5 Nm
L24/26: recommended 3 - 3.5 Nm
Einschraubgeschwindigkeit: max. 350 1/min
Tightening speed: max. 350 1/min
2
1
4
NORMA 60-80
SW 7
across flats 7
Bandkanten geboerdelt
band edges rounded
Kennzeichnung (Beispiel)
Marking (example)
3
Bandpraegung asymmetrisch
asymmetrical band stamp
Wellfedergeometrie ab
Anlieferdurchmesser: 90
Spring geometry ex
Shippingdiameter: 90
NORMA Herstellercode auf Bandinnenseite
NORMA BATCH CODE BAND INSIDE
Made in Germany