User Manual

Dry Mode

• Press the “MODE” button on the unit or the remote until the “DRY” indicator lights.

• The temperature and fan speed cannot be adjusted in this mode. The fan will operate at Low speed.

• Keep windows and doors closed and do not run the exhaust duct to window.

Auto Mode (Remote Control Only)

• Press the “MODE” button until the “AUTO” indicator lights.

• Press the Temp Up or Down on remote select your desired room temperature. The temperature can

be set within a range of 62 °F-86 °F/17 °C-30 °C. The fan speed cannot be changed in this mode.

• The unit will run either Cooling or Fan only to maintain room temperature.

Fan Mode

• Press the “MODE” button on the unit or the remote until the “FAN” indicator lights.

• Press the “FAN SPEED” button on remote control to choose the fan speed. The temperature cannot

be adjusted.

• Do not run the exhaust duct to window.

Timer Mode (Remote Control Only)

• This feature is for setting the unit to turn on, off, or both, in a set number of hours.

•

• Press or hold the UP or DOWN button to set the Auto time in 0.5 hour increments, up to 10 hours,

then in 1 hour increments up to 24 hours. After 3 seconds with no button being pressed, the time

remaining until starting and/or stopping.

NOTE: The Timer feature counts down the time set for On or Off, it is not based on the current time.

•

the push the Timer button again, then set the desired Timer Off or On. For example, if it is currently

1:30pm, and you would like to set the A/C to turn on at 5:30pm, and then off at 10:30pm, press Timer

f in 9 hours.

NOTE: The Timer On / Off function is controlled by the remote. It must be pointed at and within

range of the unit.

Sleep/Eco Mode (Remote Control Only)

• Pressing the Sleep button in COOL mode will allow the set temperature to increase by 2°F / 1°C

after 30 minutes, and again after another 30 minutes. The unit will maintain the new temperature for

7 hours, and then return to the previously selected temperature setting.

NOTE: Sleep Mode function is controlled by the remote. It must remain within range and pointed

at the unit.

NOTE: This feature is not available in FAN or DRY mode.

Other Features

• Setting Or Adjusting The Clock (Remote Control Only)

1. When batteries are installed in the remote controller, the clock panel will display “12:00”. Press